Operating the Wöhler BC 600 via the app
64
8.7.4 Save measurement
Data
•
Tap SAVE if you wish to save the measure-
ment results.
Fig. 63: Building Data Conflict
In the following special case the window shown in
Fig. 63 will appear: A measurement was carried
out without measurement preparation (cf. chapter
8.4.3). The measurement data should then be
saved in an object with included measurement
preparation, but contains data that lead to a con-
flict (e.g. deviating building volume).
Fig. 64: Customer Management
You will now switch to Customer management,
see chapter 8.4
•
Select the customer, the project and the object
under which you wish to save the measure-
ment data and then tap Save (or create a new
customer, a project and an object and then
save the measurement data under the new
customer).
Note!
This selection is not necessary if the measure-
ment has been started directly from the window
„Measurement Preparation (cf. chapter 8.4.3).
•
A lock symbol indicates that measurement
data has been saved in a customer / project /
object folder.
