821667: VAMP2 Series User Guide
© 2012 Wohler Technologies, Inc. All rights reserved.
7
VAMP2 Series User Guide
Specifications
Specifications
The VAMP2 Series monitors meet the specifications listed in
Table 1–1
through
Table 1–6 on page 10
.
Table 1–1
Audio Specifications
Specification
VAMP2-SDA
VAMP2-MDA
Inputs
2 Banks of 4 analog on DB-25
2 Banks of 2 AES on BNC
2 Banks of 2 Balanced AES on DB-25
Outputs
4 on Balanced AES from SDI on HD-15
2 Speakers on Terminal Posts
Level Meters
Four 53-segment high-resolution tri-color
(red/yellow/green) LED bar graphs
Level Meter Scale
+0 dB to -66 dB
Level Meter Mid-scale
Resolution
1 dB
Level Meter Dynamics
VU and PPM, simultaneous
Peak Acoustic Output: (@
2 ft.)
96 dB SPL
Output
10 W RMS (4
),
left and right, 14 W peak
Analog Input Impedance
27k
balanced, minimum
Analog Input Overload
+24 dBu Balanced
Analog Reference
+8, +6, +4, or 0 dBu
Converted Analog
Output (S/N
>90 dB
Converted Analog
Output (THD)
<0.008%
Digital Reference
-20, -18, or -9 dBu
AES Input Sampling Rate
32 to 48 kHz, auto-select
AES D to A Converter
24-bit, low jitter
AES Termination
(removable)
110
Balanced; 75
Unbalanced
Frequency Response
(6th Octave)
80 Hz to 16 kHz, (± 7 dB -10 dB
@ 50 Hz, 22 kHz)
Hum and Noise
> -68 dB below full output
Electrical Response
20 Hz to -20 kHz (± 1 dB)
USO
RESTRITO
