8
© 2005 PANORAMAdtv ALL rights reserved
MON1 HR Series
User Manual P/N
821633
Rev-
A
1
2
3
B
A
D
C
E
Please refer to
Figure-2a
on the facing page to familiarize yourself with the
front panel
features of the
MON1 HR Series
unit. The
following sections describe these functions and are referenced, by number, to
Figure-2a
.
Section 2: Operation
Front Panel Features
Power Indication LED
This LED glows GREEN to indicate the units
Power Connector
(
Item A
) is connected to mains power and an operation voltage
is present.
LCD Video Display Controls (Brightness/Contrast)
The LCD video displays are adjustable using these two image controls:
•
BRIGHTNESS
- adjust for desired screen brightness.
•
CONTRAST
-
adjust for desired image scene, dark-to-bright contrast.
LCD Video Display
View the input video source here. Screen image
brightness
and
contrast
are adjustable by two manual controls (
Item 2
).
Supported
PAL/NTSC
,
HD
, and
SD
formats are automatically detected and accomodated. See page
5
for specifications and
page
6
for the optical characteristics of this high-resolution LCD display.
Rear Panel Features
Please refer to
Figure-2b
on the facing page to familiarize yourself with the
rear panel
features of the
MON1 HR Series
unit. The
following sections describe these features and are referenced, by letter, to
Figure-2b
.
Power Connector
Attach a standard IEC-320 power cord between this connector and mains power. The front panel
Power LED
(
Item 1
) will glow
GREEN to indicate that an operating voltage is present.
Option Switch
This 10-position BCD switch is used to select the bootload and fill options. Fill options display a solid field of 100% of selected
color in the
absence
of an incoming video signal. Settings are shown in the table below:
SDI Output Connector
This connector outputs an buffered and equalized copy of the
SD-SDI
or
HD-SDI
signal entering the
SDI Input Connector
(
Item D
).
SDI Input Connector
This female BNC connector input accepts either
SD-SDI
or
HD-SDI
inputs of various
SMPTE
standards (see
LCD Display
Video Raster Format Parameters
table on page
6
) and is terminated at
75
Ω
Ω
Ω
Ω
Ω.
SDI Lock Indication LED
This LED glows GREEN to indicate that the
SDI
source signal connected to the
SDI
input is "locked".
1)
For normal operation, the BCD switch must be set to positions
1
,
2
,
3
, or
4
.
2)
If the unit is powered while the switch is set to position
5
, a cyan fill will be displayed on the screen.
NOTES: