Data recording
24
4 Data
recording
NOTE!
To be able to use the data logger you require the Wöhler indoor environment software
as well as the driver for the USB adapter cable.
Install both before starting the data logger on your PC.
There are two options to set the Wöhler LOG 220 to the recording mode: By pressing the
START/STOP button on the data logger or by presetting the starting time in the indoor
environment software. To be able to use either of the options you must first make appro-
priate settings in the software. However, it is not necessary for the data logger to be
connected to a PC when recording data.
4.1 Presettings
Fig. 13: Wöhler indoor environment
software – Selecting the COM port
Launch
the
Wöhler
indoor environment soft-
ware
Connect the Wöhler LOG 220 with the PC
using the USB adapter cable.
Select the COM port (Settings > COMPort >
COMX (Wöhler USB port))
Fig. 14: Wöhler indoor climate software –
choosing settings for the data logger
Select
Settings > Settings (LOG 220).
