Wohler CDL 210, Руководство по эксплуатации, Страница: 22 / 28

Setup
7.8
Reset
rS�
Fig 17: Reset-mode
rS�
Fig. 18 . no reset
50
•
In norma l mode press and hold the SET key
for three seconds to enter P1 .0 mode.
•
Press LOG/.& three times to enter P4.0 mode
for reverting the meter to default status, see
F i g. 17.
•
Press SET to enter P4 .1 mode with blinking
"No" (default), see Fig. 18, so that no reset will
be done.
•
To switch the status (Display "YES") press
LOG / .& or MIN/MAX". When " Yes " is cho­
sen, y reset to the parameters specified above
will be done.
•
Then press SET to save the sett i ng or press
ESC without saving and return to P4.0 mode.
If you choose "Yes" the meter is reset to the fol­
lowing defaults:
Parameter Default
P 1.1 700 ppm
P 1.2 1000 ppm
P 1.3 5000 ppm
P 2.1
·c
P 4.1 No (no reset)
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com