© 2004 Wohler Technologies Inc. ALL rights reserved
14
AMP2-DA/AVU
and
AMP2-DA/APP
User Manual P/N
821584
Rev-
A
E
Rear Panel Features
Section 2:
Operation
(Continued)
Selected Analog Output Connectors
These two 3-pin male XLR connectors are
analog
outputs of the selected source as assigned to the left and right speakers.
The left connector outputs the left channel (
Channel A
) and the right outputs the right channel (
Channel B
). Both connectors
are configured for low impedance connections and the output signals are not affected by the volume/balance controls or
headphone mute. For XLR pinout information see the diagram below.
Analog Input Connectors (LEFT [A] and RIGHT [B])
These two 3-pin female XLR connectors (Left and Right) accept standard
analog
audio signals and are configured for
balanced 70K
Ω
connections. For XLR connector pin-out information, see the diagram under
Item E
. Note that the
analog
inputs are monitored
only
when the
Analog/Digital Source Select Switch
(
Item 3
, page
8
) is set to
ANALOG
.
F
High (+)
Low (-)
Gnd
(Shield)
Pin-1
Pin-2
Pin-3
Pin-1
Gnd
(Shield)
Pin-2
High (+)
Pin-3
Low (-)
Female XLR Pinout
Male XLR Pinout
