Page 91
1.
Pressing the knob while the highlight is over the knob label displays the Label
Menu so you can rename the hot key. Refer to the
in this
chapter
for details.
Note:
The label may not be changed on the Status/ Metadata or Off hot keys.
The label on the Select Cluster can be changed in the
, but not here.
2.
Many hot keys are available to make a variety of useful functions accessible
at the touch of a button:
a)
Select Cluster
b)
Recall Preset
c)
Trim
d)
Downmix
e)
Dolby Zoom
f)
Status/Metadata
g)
Status/Metadata/Preset
h)
Automation On/Off
i)
Loudness Screen
j)
Off
3.
Pressing the knob while the description of a hot key is highlighted selects it
and allows further detailing of the function of some of the hot keys.
Note:
Multiple trim hot keys cannot adjust the same channels on the same menu,
so channels that are not selectable are disabled and grayed out.
4.
Pressing the knob while a channel or channel pair is highlighted selects or
deselects it from applying to this hot key. Note that in some cases you can
select multiple channels.
5.
Pressing the knob while a preset is highlighted, selects it and deselects any
other preset that was already selected. If you choose Selectable, you will be
able to rotate the knob to display the available presets on the Main Screen.
Hot Key Configuration Menu 9 Through 16
This menu allows you to configure hot keys 9 through 16 on the Main Screen. The
selections on this menu are identical to those on the Hot Key Configuration
Menu 1 Through 8.
Содержание AMP2-16V-M
Страница 170: ...Page 163 Figure B 8 Deleting Stream Destinations...
