Wohler AMP2-16V-M, Руководство пользователя

Страница: 129 / 172

Page 122
Analog I/O and SPDIF TOSLINK Card
Rear Panel Adaptor
After adding the Analog I/O Card and its corresponding rear panel adaptor to the
AMP2-16V, the rear panel adaptor provides the connectors shown in Figure 6–4.
Figure 6–7: Analog I/O and SPDIF TOSLINK Panel Adaptor and Cover Plate
Menu Modifications
You can select the analog input or the Toslink Input from the Monitor Mixer
Configuration Menu and also from the AES and Analog Output Menus.
The Audio Processor Configuration Menu will now display an Analog I/O knob.
Pressing this knob will display the Analog Output Configuration Menu from which
you can select and configure the outputs.
Note: You can modify the analog reference levels in the Hardware Configuration
Menu
.
Note: Analog I/O cards with TOSLINK options will not allow the analog outputs to
be routed back to the monitor mixer. The internal pathways used for this feature
are also used by the TOSLINK card.
Connector Pin-Outs
The pin-outs of the Analog I/O and SPDIF TOSLINK Card are identical to those of
the Analog I/O Card. Refer to Tables 6-4 and 6-5.