Wohler AMP2-16V-M, Руководство пользователя

Страница: 120 / 172

Page 113
Table 6–1: Available Add-On I/O Modules
I/O Module Name Functionality Provided
3G/HD/SD-SDI-V Card
Two 3G/HD/SD-SDI inputs
8 de-embedded AES pairs outputs 1
selected reclocked output (Includes
automatic frame rate detection)
AES Input Card 16 channels (eight AES pairs)
AES Output Card
16 channels (eight AES pairs) consisting
of a mix of any channels
Analog I/O Card 8 channels
Analog I/O and SPDIF
TOSLINK Card
8 channels and 1 optical pair
Dante AoIP Receiver
Card
16 channel Dante Rx; 8 channel AES67
Rx
Ravenna AoIP Receiver
Card
16 channel Ravenna Rx; 8 channel
AES67 Rx
Dolby Card D/E/DD+
Card
*
Provides Dolby decoding for an AES pair
or de-embedded SDI of your choice
* The Dolby D/E/DD+ Card is a daughter card and does not occupy one of
the vacant slots since it does not require its own external connectors.
Standard Models
While a huge number of functional combinations are possible by adding I/O
modules, the following typical combinations form Wohler’s standard offering.
Table 6–2: Relationship Between Model Name and Included I/O Modules
Model
3G/HD/
SD-SDI
Card
AES
Input
Card
AES
Output
Card
Analog
I/O Card
Dolby D/
E/DD+
Card
AMP2-16V-M 
AMP2-E16V-M  
Menu Modifications for I/O Modules
The menus automatically adjust themselves to accommodate any I/O modules that
are added to the system. This means that the channels of any new input cards and
the mixed outputs of any output cards automatically appear as sources in the
available monitoring or output menus. The output cards automatically cause output
menus to appear so that you can assign sources to them.