manualshive.com logo in svg

Wohler AMP1A SUM6/RD, Руководство пользователя

Поделиться
Скачать
Wohler AMP1A SUM6/RD Скачать руководство пользователя страница 3

© 2010 Wohler Technologies, Inc. All rights reserved.

1

SUM Series User Guide

Introduction

Overview

The SUM Series of audio monitors provide self-powered, full-fidelity 

stereo or monaural monitoring in a single (1U) industry standard rack-

space mount. The AMP1A-SUM6/RD model features speakers driven 

by three power amplifiers: two amplifier/driver combinations to 

handle midrange and high frequency information in stereo, while a 

third center channel reproduces information below the 500 Hz 

crossover point for reproduction through the woofer. The 

AMP1A-SUM6/RD model, has two midrange and one woofer speaker 

in a 6.5” depth. The VMDA-SUM8 provides either analog or AES 

digital inputs, summed as mono or stereo through two amplifier/

drivers in an ultr-shallow 4.5” depth.

Topics

Topics

Page

Introduction

1

Safety Instructions

2

Installation Recommendations

3

Features

4

Applications

6

Specifications

6

Front Panel Controls

7

Rear Panel Connectors

10

Technical Functional Overview

12

Содержание AMP1A SUM6/RD

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды