background image

Title and Contents 

...........................................................

Important Safety Instructions and Introduction ..........................................

Section 1: General Features and Specifications

........

Description and Features  ......................................................................

Applications, General Specifications, and Other Options ...........................

Installation  ..............................................................................................

Section 2: Operation 

..................................................................

Front Panel Features  ...............................................................................

Rear Panel Features .................................................................................

Section 3: Technical Information 

.......................................

General Technical Observations ...............................................................

Level Meter Gain Calibration and Display Mode Settings .........................

Bargraph Driver Circuit Description (919017) ..........................................

Level Meter Specifications .......................................................................

Multi-Channel Analog Switching PCB Circuit Description (919013) .........

Interconnect Block Diagrams  ..................................................................

AMP1A Series

AMP1A-4S AMP1A-10S AMP1A-LP4S AMP1A-LP10S

1U Multi-Channel Audio Speaker Monitors

with Four or Ten Analog Audio Inputs,

Stereo Analog Outputs, and Optional Dual

10-Segment Level Meters and Phase Indication

 Document  P/N

821527

  Rev-

B

1

2

3

4

5

6

7

8

10

13

14

15

16

16

17

18

CONTENTS

User  Manual

© 2006   Wohler Technologies  Inc.   ALL rights reserved

1

Содержание AMP1A-LP10S





















Отзывы: