Wohler AMP1-16V-MD, Руководство пользователя

Страница: 107 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h no lo g i e s , I n c . A l l r i g h t s r e s e r ved .
99
C h a p t e r 7 Firmware Updates
U p g ra d i ng t h e S ub - P r o c e ss o r F i rm w a re
Figure 7–5 Unit Information Menu
2. When the Unit Information Menu appears, press the S/W
Update button.
3. Note the line of text at the top of the window with the FTP
address. It should read something like
ftp://192.168.0.2/
Write it here ___________________________________________.
4. On the monitor, press the ENABLE FTP button.
5. Open My Computer from the Windows desktop or from the
“Start” menu.
6. In the Address line, enter the address you wrote down in Step 3
(in the previous section), exactly as noted. For example, enter ftp:/
/192.168.0.2/ .
7. You will see something similar to the following screen shot in
Figure 7–6 , if the folders are set to detail view. The filename, folder
name, and file sizes below are accurate. All other attribute
information, especially the dates, are bogus and should be
ignored.
Serial /
Ethernet Info
S/W Update
Application: AMP1-16-3G
Unit S/W Info
Unit Information Menu
Hardware 1RU Hardware
Application Version:
03.00
NvRam Table Ver: 00.20
Audio FPGA Ver: 01.00
Video FPGA Ver: N/A
Graphics 0 Ver: 02.00
Graphics 1 Ver: 02.00
Graphics 2 Ver: 02.00
Front Pic Ver: 00.00
Dolby Ver: 2.1.2.6
DSP Ver: 1.30
Display Type:
LCD Type A
I m p o r t a nt :
If the address comes up as ftp://0.0.0.0/, the unit is using DHCP in a
direct connection, or no Ethernet connection exists. See
Connecting to a
LAN on page 114 .
USO
RESTRITO