Wohler AMP1-16V-MD, Руководство пользователя

Страница: 104 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h n o l o g i e s , In c . A l l r i g h t s r e s e r ve d .
96
Ch a p t e r 7 F i rm w a re U p d a t e s
U p g r a d i n g t he N et b u rn e r S o f t w a r e
Upgrading the Netburner Software
Refer to Appendix A to establish a connection between the host
computer and the AMP1-16V.
1. Launch the NetBurner AutoUpdate utility found in the update
package in the Utilities Folder. Click on the Find button. You
should see something similar to Figure 7–1 below.
Figure 7–1 Find Netburners Dialog
2. Click to highlight the NetBurner module you want to update, and
click
OK
.
Decision Point:
If the Application version is current as noted in Step 3 above, in the
Comparing Firmware Versions section, you may skip to the next
section.
Otherwise, continue with this section.
USO
RESTRITO