WOERLEIN CTV-3702 DVB-T, Руководство пользователя

Страница: 16 / 21

16
Menu Control
Press the Menu key located on remote control and unit. Menu will be displayed on screen.
PICTURE → SYSTEM → TIMER → PRESET → EXTRA
↑ ↓
If there is an arrow, it means there is a submenu. Press CH+ or CH- key located on remote control
and unit to select menu. Press VOL+ or VOL- key on remote and unit to enter the submenu.
Pressing VOL+ or VOL- brokenly or continuously will change the settings. To exit setting, press
Menu key until menu disappears on the screen. Note: If the unit does not exit the menu setting
completely, all keys will not function except Power key.
Adjust TV Picture
1.Press Menu key on unit or remote control. Menu will be displayed on screen. Press VOL+ or
VOL- to enter PICTURE submenu. Then press CH+ or CH- key to select submenu.
CONTRAST → BRIGHT → COLOR → TINT → SHARPNESS
When you select one of the above submenu, press V+ or V- key to change its setting. Pressing V+
will increase the setting and green bar will move to right. Pressing VOL- will decrease the setting
and green bar will move to left.
Switch of TV System
Press CH+ or CH- key to select SYSTEM in menu. Press V+ or V- to enter the submenu. Then
press CH+ or CH- key to select COLOR SYSTEM and SOUND SYSTEM. Note: When TV is in
AV mode, only COLOR SYSTEM is applicable. Pressing COL SYS key and SOUND SYS key
located on remote control will directly enter COLOR SYSTEM and SOUND SYSTEM setting
menu.
1. Press CH+ or CH- to select submenu COLOR SYSTEM. Press VOL+ or VOL- key to select
the TV signal system: PAL
→
NTSC358
→
NTSC443
→
AUTO
. When AUTO is selected, the unit will automatically select the COLOR SYSTEM and display the
correct picture.
1. Press CH+ or CH- key to select submenu SOUND SYSTEM. Press VOL+ or VOL- key to
select TV SOUND SYSTEM: BG
→
DK
→
I
→
M
→
BG-SUB. Only when you select the correct
SOUND SYSTEM, the sound will be clear without any noise.
Timer Setting
Press CH+ or CH- key to enter TIMER setting
.
Press VOL+ or VOL- key to enter submenu.
Note: CLOCK must be set first. To set CLOCK, enter submenu CLOCK, press VOL+ to enter
AM/PM setting. Press number keys on remote control to input time as follows: Hour
10-digit
→
Hour 1-digit
→
Min.10-digit
→
Min.1-digit
→
Set Completion. After the set of CLOCK,
press CH+ or CH- key to select following: