Woan Technology W1201500, Руководство пользователя

Страница: 9 / 17

Remove the Battery Case from Contact Sensor.
Mount the Battery Case to the target surface
using the screws provided. You don't need to peel
the protective film off during this process.
Install the Contact Sensor back to the Battery Case,
that has been mounted to the target surface.
Line up the Contact Sensor and the Magnet on the
door or window and make sure the Magnet is
aligned with the bottom of the Contact Sensor.
Peel the protective film off Magnet and stick it to
the surface near the Contact Sensor. Make sure the
gap between the sensor and the magnet is less
than 30mm when the door or window is closed.
Mount to a surface using screws
30mm
Magnet is aligned with the
bottom of Contact Sensor
11 12