Product User Manual
□ Normal □ Internal Use
Confidential □ Restricted Confidential
35 / 36
6.6 LTE Power Saving Mode
Note:
Details will be provided in a future revision of this document.
7.0 Safety Recommendations
Be sure use of this product is allowed in the country and in the environment required.
Use of this product may be dangerous and must be avoided in the following areas:
Where it may interfere with other electronic devices in environments such
as hospitals, airports, and aircraft
Where there is a risk of explosion such as gasoline stations and oil
refineries
The user is responsible for compliance with the legal and environmental regulations
of their location of use.
Do not disassemble the product; any evidence of tampering will compromise the
warranty’s validity.
We recommend following the instructions of the hardware user guides for a correct
wiring of the product. The product must be supplied with a stabilized voltage source,
and the wiring must conform to relevant security and fire-prevention regulations.
This product must be handled with care; avoid any contact with the pins because
electrostatic discharge may damage the product. Exercise the same level of caution
regarding the UIM card; carefully check the instructions for its use. Do not insert or
remove the UIM when the product is in power-saving mode.
The system integrator is responsible for the functioning of the final product;
therefore, care must be taken for the external components of the module as well as
for project or installation issues—there may be a risk of disturbing the GSM network
or external devices or of impacting device security. If you have any questions, refer to
the technical documentation and the relevant regulations in force.
Every module must be equipped with a proper antenna with specific characteristics.
The antenna must be installed with care in order to avoid any interference with
other electronic devices.
