57
Example:
The machine is to be switched on automatically at
7.00 hours and off automatically at 11.00 hours every day
of the week (Monday to Sunday).
The following keys are used for this purpose:
“
Prog
.” To activate memory locations and save the
programmed switching times.
“
Day
” to enter the days of the week or complete blocks
of days.
Set the times for switching on and off
“
h
” for the hours
“
m
” for the minutes
Changing the programmed times
Press “
Prog.
” to start programming mode and use the same
key to select the memory location to be edited. The values
can then be changed with the aid of the keys “
Day
”, “
h
”
and “
m
”. they are saved by pressing the key “
“.
Deleting programmed times
If a programmed time is to be cancelled out, it must be
deleted with the aid of the “
h
” and “
m
” keys.
1 2 3 4 5 6 7
+1h
Press the “
Prog.
“ key for 3 seconds.
AM
- - : - -
Now the memory is erased completely, including the time
of the day.
Programming the timer
The timer
14
has three positions which are indicated on the
display. The switching times are active, bypassed or
deactivated, depending on the position selected.
( / )
The machine automatically switches on or off, depending
on its momentary operating condition (ON or OFF), at the
programmed times when
has been set
.
