background image

25

User Manual WMF 1100 S

Start-up | Start-up program

Place the water tank water filter (optional)

This item is a step that is performed during the 
start-up program.

For drinking water with carbonate hardness from 
5 °dKH or higher, a WMF water filter must be fitted; 
otherwise, the coffee machine can be damaged due to 
build-up of scale.

Determine the water hardness

 

™

Request drinking water hardness reading from 
water supplier, or determine using WMF carbonate 
hardness test (complete with instructions) in the 
accessories

The carbonate hardness test is supplied with the 
accessories.

Capacity

The included water filter for the water tank (BWT 200 l) 
can treat up to 200 litres of water at 10 °dkH. 
The actual service life depends on the hardness of 
the drinking water supply and can be found in the 
following table.

Water 

hardness

Capacity 

in litres

Water 

hardness

Capacity 

in litres

< 5

no filter needed

15

135

above 5

400

16

125

6

335

17

120

7

285

18

110

8

250

19

105

9

220

20

100

10

200

21

95

11

180

22

90

12

165

23

85

13

155

24

80

14

145

> 25

70

Water filter capacity

The unit used is the “Deutsche 
Karbonathärte” (°dKH)

Filter change  

w

 Care   

page 43

Note

If the water hardness is between 
0 and 5 °dKH, no water filter is 
needed.  

w

 Start-up  program   

page 24

Содержание 1100S





















































































































Отзывы: