Installing the battery
：
安装电池：
1. The two intelligent robots use a 7.4V 200MAH lithium batteries.
1.两轮智能机器人使用一颗7.4V 200MAH锂电池。
2.
Use a Phillips screwdriver to remove the screws on the back of the
battery compartment cover located on the robot.
2.使用十字螺丝刀卸下电池仓盖位于机器人背面的螺丝。
3.
The battery is connected to the plug socket and robots.
3.把电池插头和机器人的插座相连。
Important battery information:
重要的电池信息：
Remove toys rechargeable battery before recharging.
Rechargeable battery charging only under adult supervision.
Lithium battery polarity (+) and (-) is not reversed.
Do not try to charge non-rechargeable batteries.
Do not throw batteries into fire.
While replacement of the same type / brand all batteries.
Power supply terminals are not to be short-circuited.
Remove spent batteries from the toy.
Adults battery should be replaced.
Please do not play for a long time to unplug from the lithium
battery o
n the robot.
充电之前卸下玩具充电电池。
可充电电池仅成人的监护下进行充电。
锂电池极性（+）和（ - ）不可接反。
不要试图充电非充电电池。
不要乱扔电池投入火中。
同时更换的相同类型/品牌所有电池。
电源端子不被短路。
从玩具中取出用完的电池。
电池应由成年人进行更换。
长时间不玩请把锂电池插头从机器人上拔掉。
Low battery indicator:
低电量指示：
当电池电量快用完时，机器人上的两
个眼睛上的灯光会闪烁，提示电池
即将耗尽请尽快充电。
When the battery runs out, the two eyes on the robot
lights will flash, indicating the battery is about to run
out of charge as soon as possible please.
2
电池信息
Battery Information
电池图/安装
Battery Diagrams
USB充电线
USB charging cable
充电插口
Charging jack
Charging intelligent robots:
press the icon with the USB charging cable is
connected to the USB charging cable is
connected to a computer or other USB devices.
智能机器人的充电：
按图示与USB充电线相连，把USB充电线
与电脑或其他USB设备相连。
Avoidance mode
