Industrial R210 Series Cellular Router User Manual
www.wlink-tech.com
23
3.4.2
DMZ Setting
Step 1
Please click “Advanced Network> DMZ” to check or modify the relevant
parameter.
Figure 3-9
DMZ GUI
Table 3-8
“DMZ” Instruction
parameter
Instruction
Destination
Address
The destination address inside the LAN.
Source
Address
Restriction
If no IP address inside, it will allow all IP address to access.
If define IP address, it will just allow the defined IP address
to access.
Leave Remote
Access
Step 2
Please click ”save” to finish
----End
3.4.3
Triggered Setting
Step 1
Please click “Advanced Network> Triggered” to check or modify the relevant
parameter.
