WL-Rxx Series Router User Manual
57
2.12.11
Firmware upgrade
Step 8 Please click “Administrator>firmware upgrade” to open upgrade firmware tab.
Figure 3-3
Firmware Upgrade GUI
Please don’t cut off the power during upgrading. The upgrade period is about
4mins.
2.12.12
“Reset” Button for Restore Factory Setting
If you couldn’t enter web interface for other reasons, you can also use this way.
“Reset” button is near to Console port in WL-Rxx panel, This button can be used when the
router is in use or when the router is turned on.
Press the “RST” button and keep more than 8 seconds till the NET light stopping blink.
The system will be reverted to factory.
Table 2-33
System Default Instruction
Parameter
Default setting
LAN IP
192.168.1.1
LAN Subnet Mask
255.255.255.0
DHCP server
Enable
User Name
admin
Password
admin
After reboot, the previous configuration would be deleted and restore to factory
settings.
Содержание WL-R100 Series
