Industrial Cellular Gigabit Router User Manual
www.wlink-tech.com
17
3.2.3
Dynamic DNS Setting
Step 1 Single click “Basic Network->DDNS to enter the DDNS setting GUI.
Figure 3-3
Dynamic DNS Setting
Table 3-3
DDNS Setting Instruction
parameter
Instruction
IP address
Default is standard DDNS protocol, for customized protocol, please
contact WLINK engineer. use default IP 0.0.0.0 as usually.
Auto refresh
time
Set the interval of the DDNS client obtains new IP, suggest 5mins or
above
Service
provider
Select the DDNS service provider that listed.
Step 2 Please Click “Save“ to finish.
----End
3.2.4
Routing Setting
Step 1 Single click “Basic Network->Routing to enter the DDNS setting GUI.
