WLINK WL-G200 Series, Руководство пользователя

Страница: 54 / 80

WL-G200 Series Router User Manual
54
2.12.10
Firmware upgrade
Step 5 Please click “Administrator>firmware upgrade” to open upgrade firmware tab.
Figure 3-3
Firmware Upgrade GUI
When upgrading, please don’t cut off the power.
2.12.11
“Reset” Button for Restore Factory Setting
If you couldn’t enter web interface for other reasons, you can also use this way.
“Reset” button is near to Console port in WL-G200 panel, This button can be used when
the router is in use or when the router is turned on.
Press the “RST” button and keep more than 8 seconds till the NET light stopping blink.
The system will be reverted to factory.
Table 2-31 System Default Instruction
Parameter
Default setting
LAN IP 192.168.1.1
LAN Subnet Mask 255.255.255.0
DHCP server Enable
User Name admin
Password admin
After reboot, the previous configuration would be deleted and restore to factory
settings.