Wlan BOX WB100A, Руководство пользователя

Страница: 50 / 52

48 VoIP Network Services GmbH, Justus ‐ von ‐ Liebig ‐ Str. 26, 31535 Neustadt
5 Functions
5.1 Making Calls

Dial the number directly and wait for 5 seconds (default No Key Entry Timeout).

Dial the number with ending char #, WB100A will dial out immediately

Dial the phone number which matches one dial rule, WB100A will dial out immediately, no
need to press # or wait for 5 seconds.
5.2 Call Waiting

Enable waiting feature in SIP-->Line1-->supplementary Service → Call Waiting (default is
Enable)

While in conversation, user will hear a special stutter tone if there is another incoming
call.

User then can press “*77” (or Flash button)to put the current call party on hold
automatically and switch to the other call. Pressing “*77”(or Flash button) toggles between
two active calls.
5.3 Call Hold

While in conversation, pressing the “*77”(or Flash button), will put the remote end on hold.

Pressing the “*77”(or Flash button) again, will release the previously Hold state and
resume the bi-directional media.
5.4 Call Transferring
WB100A supports blind transfer and attended transfer.
5.4.1 Blind Transfer
Assuming that call party A and party B are in conversation, A wants to Blind Transfer B to C

Party A dials *98, A will hear dialing tone

Dial party C’s number, and press # (or wait for 5 seconds) to call C, then C will ring, A will

be disconnected.

If C answer the call, B and C can go on talking.
5.4.2 Attended Transfer
Assuming that call party A and B are in conversation. A wants to Attend Transfer B to C:

Party A dials *77 to hold B, A will hear dialing tone

Dial party C’s number, and press # (or wait for 5 seconds) to call C, then A will hear
ringing tone.

If C answer the call, A will talk with C firstly

If C wants to talk with B, A press “*98” to transfer, and then C will talk with B. If C does not

talk with C successfully, A will talk with B again.