LTF-TV820
© Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
Adjustments during normal Operation
•
Switch the saved channels either with the CH+ and CH- buttons of the remote control or with the + and
– buttons at the monitor itself.
•
The volume can be adjusted directly with the VOL+ and VOL- buttons of the remote control.
Troubleshooting:
Symptom: In TV-mode a clear picture but no sound.
Cause: In some areas different soundsignals are used.
Solution: Go to SOUND-SYSTEM in the menue and adjust the sound.
Symptom: The screen shows wrong colours.
Cause: 1. The videosource cause a problem. 2. The colours of the monitor need to be adjusted..
Solution: 1. Check the videosurce. 2. Go to COLOR in the menue and adjust it.
Symptom: Disturbed picture.
Ursache: Interference from an outer source.
Lösung: Just wait until the source of distortion is passed.
Symptom: No picture.
Cause: The monitor gets no signal.
Solution: Check the videosource and all the wires.
Sympton: The remote control is not working anymore.
Cause: Its battery is weak.
Solution: Exchange the batterie.
1
2
3
