530-082
Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
Specifications:
Input Voltage: 9 V DC
(9V Battery or Power-Supply 9V)
Dimensions LxWxH: 72x80x43mm
Alarm Delay: 7 Seconds
Working Humidity: 93% RH
Working Temperature: -20 bis +40°C
Alarm Loudness: 80dB
Detection Distance: 8 M
Detection Range: 140°
Static Current: 0,07mA
Owners Manual
Mini-Sensor-Alarm
Introduction
Dear customer,
we gratulate of getting your new Mini-Sensor-Alarm!
With this choice you have decited to a product which
combines good design and practical technical features.
Please read the following advice carefully and work
accordingly to these advice to get troubleless fun with
the unit.
Features
•
Infrared-Motion-Detector
•
Alarm-Siren
Safety-Instructions
•
Do not put the system to water.
•
Avoid a working place of much dust or
excessive heat.
•
When you put the system from a cold in a warm room, there is a humidity in the system. Therefore wait
2-3 Hours after Transport.
•
Please take out the battery in order to avoid damaging the sensor
if you do not use it for long time.
•
Do not scratch the surface of the detector-lens.
Installation and Usage
•
To open battery-door push back the door.
•
Put in a 9V battery.
•
Fix the battery-door.
•
Put off the mounting-bracket and fix it at the wall with the
attached Screws.
•
Then fix the system at th mounting-bracket again.
•
Put the slide-switch to the Chime-Mode or Alarm-Mode.
•
In
Alarm-Mode
the system put out a siren tone when detection.
•
In
Chime-Mode
there is a gong-sound when there is any
detection.
