© Copyright 2011 WIZnet Co., Inc. All rights reserved. Ver. 1.1
10
W7200-EVB User
’s
Guide
6
Development environment
6.1
IDE
The IAR Embedded Workbench for ARM IDE is currently supported. (Other IDE tools for ARM
IDE will be supported as like Keil.) The W5200E01-M3 software package is released the version
of IAR Embedded Workbench for ARM 5.41. Refer to IAR’s own documentation on how to use it.
The W5200E01-M3 software package contains various examples for using W5200
6.2
Install Flash loader Demonstrator
Flash Loader demonstrator is used to program for W5200E01-M3.
Note:
Refer to UM0462 User manual at
www.st.com
for more detailed information about
STM32F103xx Flash Loader demonstrator
- Download: UM0462 Flash loader demonstrator
http://www.st.com/internet/mcu/product/216817.jsp
Click “Design Support” -> SW DEMOS (Bottom end of page)
Figure 3 Download Flash loader Demonstrator
6.3
USB-to-UART interface IC Driver
When the mini-USB is connect to USB-equipped Windows computer, the Device Manager will
properly installed USB-to-Serial driver. If USB-to-Serial adaptor not works as expected, you can
download the USB-to-Serial driver at www.ftdichip.com.
Note:
Refer to Installation Guides at www.fuducguo.com more detailed information about
USB-to-Serial converter.
- Download Installation Guides:
1.
www.fidichip.com
2. Click “Support->Documents-> Installation Guides”
3. Download up to your operation system.
- Download Driver
1. www.fidichip.com
2. Click “Drivers->VCP Drivers”
3. Download up to your operation system.