4
IT63-0002
1b-1
1b-4
Insert (B) into both holes. Use a hammer to tap in if necessary.
Вставьте (B) в отверстия. С помощью молотка, если необходимо.
Insérer (B) dans les deux trous. Utilisez un marteau pour enfoncer dans le cas échéant.
1b-3
MASONRY BLOCK & CONCRETE INSTALLATION
B
Level wall plate, then mark 6 hole locations.
Используйте уровень, чтобы удержать крепление ровно на стене. Отметьте расположение 6ти отверстий.
Niveau de la plaque murale, puis marquer l’emplacement des 6 trous.
MASONRY BLOCK & CONCRETE INSTALLATION
1b-1
1b-2
drill depth
65mm / 2.5”
drill diameter
11mm
7/16”
Use 11 mm-7/16“ drill bit to drill 65mm - 2.5” holes on marks.
Используйте 11мм - 7/16“ сверло, чтобы высверлить отверстия 65 мм / 2.5” глубины по меткам.
Utilisez un
11 mm-7/16“
bits de forage pour percer 65mm - 2.5” po.
1b-2
MASONRY BLOCK & CONCRETE INSTALLATION
2a
8mm x 65mm
A
Washer
U
Fasten wall plate to wall using screw (A) and washer (U).
Прикрепите настенное крепление к стене с помощью винтов (А) и шайб (U).
Fixer la plaque murale au mur avec la vis (A) et la rondelle (U).
INSTALL WALL PLATE-WOOD STUD
2a
Fasten wall plate to wall using screw (A) and washer (U).
Прикрепите настенное крепление к стене с помощью винтов (А) и шайб (U).
Fixer la plaque murale au mur avec la vis (A) et la rondelle (U).
INSTALL WALL PLATE-MASONRY
2b