5. Operation Controls and Functions
5.1 Transmitter Panel
DC 24V input for 24V 1A power adapter.
Note that the extender supports PoC function, it means that either
transmitter or receiver is powered supply by 24V/1A power adapter,
the other doesn’t need power supply.
HDMI loop output for display.
SERVICE
IR IN
IR OUT
HDMI OUT
HDMI IN
HDBT OUT
DC 24V
Name
Function description
Power LED
Red LED indicates when the transmitter is powered.
SERVICE port
Firmware update port.
DC 24V
HDBT OUT
Connection Signal
Indicator lamp
(on the left side of the
HDBT OUT port)
▪ Illuminate: Transmitter
and Receiver are in good connection
status.
▪ Flashing: Transmitter and Receiver are in poor connection
status.
▪ Dark: Transmitter and Receiver are not connected.
Data Signal
Indicator lamp
(on the right side of
the HDBT OUT port)
▪ Illuminate: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
HDMI OUT
HDMI IN
HDMI source input.
IR IN
IR port input for receiving the signal of IR remote.
IR OUT
IR port output for control of source device. This IR output
signal is from IR IN port of receiver.
RJ45 connector for connecting the HDBT IN port of receiver
with CAT 5e/6 cable.
4 / 8
