Signal power setting
Step
2
Type
the
IP
address
of
corresponding
AP
device
in
IE
browser
to
get
into the
WEP
page,
the
default
password
is
“password”.
Signal
power
can
be
set
after logging.
Transmit
Power
Configuration:
The
default
is
the
maximum
value,
the
transmit power
should
be
reduced
appropriately
when
the
signal
is
too
strong.
Encryption Configuration:
Customized key can be used for security. (The
same key should be set in the transmitter and receiver.)
Distance Configuration:
Default value is two kilometers, it should be set
according to practical situation. (The same distance value should be set in the
transmitter and receiver. If not, it will lead to high latency, low bandwidth
network connection.)
Country code:
In text (manual) mode, the channels are determined by the the
dial-up button. It is automatically selected in other modes.
