WiXHC MK IV Series, Руководство оператора

Страница: 37 / 40

not go to machine origin
go to machine origin only once
go to machine origin twice
tick “LimitEn”
e
nable ， and tick X.Y.Z and
so on to allow it to have a limit function
Tick,Increase the arc running speed
Pulse per Rotate: if your spindle is driver control by Pulse/
Dir, you need set it up.
No Homing:
Single Stage:
Dual Stage:
Home
Switches:
GSpeedHigh:
6. 5 Z safety height
Open Mach3 software ，
s
elect "
C
onfig ">>“ Safe Z setup ”
option.
Tick " Allow safe Z move " enable ;
tick " Safe Z DRO is in work coordinates " enable ;
Fill in the “safe Z” height value;
Basic parameters
34