WITURA CORPORATION SDN BHD
Office Address:
18-8-C, Gurney Tower, Persiaran Gurney, 10250 Penang, Malaysia. Tel: 604 - 228 9053 Fax: 604 – 228 9054
URL:
http:// www.witura.com
Email: [email protected]
- 7 -
The Instructions for Terminal’s Running Status
1.
The instruction for initializing terminal
2.
When Power indicator is lit, the terminal begins to initialize. If Status indicator and Used indicator are
flashing simultaneously, the terminal is searching for network. About 15
～
45 seconds later, the
telephone rings that indicates the process of initialization terminal finishes. If Warn indicator stays lit,
initialization is unsuccessful. On this condition user can set parameters for the terminal but the terminal
can’t be used to make any calls. If users dial telephone numbers, the Warn indicator will flash and the
telephone will give out the sound of three -time toot to ask the user to hang up.
3.
While users dialed barred numbers or other error numbers, the telephone gives out the sound of three-
time toot to indicate that user should hang up and redial.
4.
While you are lifting the handset and don’t dial any key for continuous 15 seconds or nobody answer
the dialed telephone for 90 seconds after the called telephone has ringed, the telephone will give out
the sound of three-time toot to indicate the user to hang up. If the user doesn’t hang up for a long time,
all indicating sound will stop after 1 minute.
5.
While calls coming in, Used indicator flashes. IF user answers the call, the Used indicator stays lit until
the call is hung up.
6.
When user is lifting the handset, Used indicator stays lit until user hangs up.
7.
When the terminal receives SMS, Warn indicator and Used indicator both stay lit that indicates that the
terminal is dealing with SMS.
8.
If Warn indicator stays flashing and the telephone continuously gives out the sound of three-time toot,
which indicates that the terminal is on the warning status. Please hang up.
Technical Specification
1.
Working condition
Environment
temperature:
0~+50
℃
Relative humidity: 10%~95%
Air pressure: 86~106kpa
Environment
yawp:
≤
60Db (A)
2.
Working frequency: GSM900/GSM1800MHz
3.
Stability of frequency: better than 2.5PPM
4.
Signal sensitivity: -103DbM
5.
Transmit power: <2w
6.
Power Supply: 220v
±
15% AC
7.
The maximal distance between terminal and telephone: 100M
Maintenance and storage
1.
The terminal should be saved in the desiccant place.
2.
If three are some matters with the terminal, please send it to the appointed repair center. (The damages
that are caused by error operation are beyond the scope of our free maintenance). Don't take apart the
terminal by yourself without our agreement
3.
The packed terminal should be put in dry and ventilated place. The number of lays of piled terminal
can’t more than 10. The condition of the storehouse is listed as follows:
Temperature: -10 to +45
℃
Relative humidity:
≤
95%
You should ensure that there is no corrosive gas in the storehouse too.
Familiar Trouble and Troubleshooting
