WITURA TECHNOLOGY SDN BHD
|
WT-1042 NETWORK PHONE CAMERA USERS MANUAL
4
Basic Operation
Turn ON
Plug the power supply and switch on the NPC , enter the system. Suggest using UPS to protect power
supply incase of any power failure
Turn Off
Check and confirm recoding is stopped before turn off the NPC, turn off the power supply and switch
to off
Auto resume after power failure
If the NPC shut down abnormally, it will automatically backup video and resume recording on last
work session after power failure
Insert the Micro SD card / thumb drive
Make sure NPC is not in recording mode ,before insert any thumb drive or Micro SD card ,otherwise
information will lose or storage equipment will be damage
Replace the battery
Please the setting information and turn of power supply switch before replacing the battery .The
NPC using button battery. Please check the system regularly , if the time is not correct , you may
need to replace the battery .
Note : the setting information must be saved before replacing battery, otherwise information will
lose
Standby Mode
Turn On the NPC and enter standby Mode , the system standby is shown as below
