2.2
Alignment of the roller guide
•
Align the roller guides
in relation to the
guide rails so that the
requirements shown
in chapter 2.1 are
achieved.
•
Use shims between
the base and the fix-
ing plate (the required
shimming accuracy is
0.5mm)
After guide shoe final adjustment and
before first test run, remove the plastic
slider on top of the cover and the clamps!
Blatt/
sheet
D623MBG.006
Datum/
date
12.08.2002
Stand/
version
12.08.2002
Geprüft/
approved WAT/MZE
Änderungen vorbehalten!
Subject to change without notice!
Isolated Roller Guides Shoes
WRG200, WRG300
Operating instruction
wrong
right
shims here
shims here
