WITTUR servogearless WSG-S2.3, Руководство по эксплуатации

Страница: 63 / 90

Mechanical installation 4
i
j
| BA 14.0197 | 11/2010
21
4.3 Mounting
4.3.1 Important notes
Minimum requirements of the end shield:
| Material S235 JR , C15 or EN−GJL−250
– If different materials are used, contact INTORQ.
| Evenness
– < 0.1 mm
| Axial runout 0.10 mm,
| Roughness Rz 10 to Rz 16
| The threaded holes must have the minimum thread depth, dimensions 15.
| The end shield must be free of grease and oil.
| Minimum requirements of the motor shaft:
– The diameter of the shaft shoulder must not be bigger than the tooth root diameter
of the hub.
4.3.2 Preparation
1. Unpack spring−applied brake.
2. Check for completeness.
3. Check nameplate data, especially rated voltage.