LK
+
/LPK
+
/LPBK
+
Safety
Revision: 07
2022-D026817
en-5
Rotating components on the gearhead can pull in parts of the body
and cause serious injuries and even death.
Keep a sufficient distance to rotating machinery while the gearhead is
running.
Secure the machine against restarting and unintentional movements
during assembly and maintenance work (e.g. uncontrolled lowering of
lifting axes).
A damaged gearhead can cause accidents and injury.
Never use a gearhead that has been overloaded to due misuse or a
machine crash (see chapter 2.5 "Reasonably foreseeable misuse").
Replace the affected gearhead, even if no external damage is visible.
Hot gearhead housing can cause serious burns.
Touch the gearhead housing only when wearing protective gloves or
after the gearhead has been at standstill for some time.
Loose or overloaded screw connections can damage the gearhead.
Use a calibrated torque wrench to tighten and check all screw
connections for which a tightening torque has been specified.
Lubricants are flammable.
Do not spray with water to extinguish.
Suitable extinguishing agents are powder, foam, water mist, and carbon
dioxide.
Observe the safety instructions of the lubricant manufacturer
(see Chapter 7.4 "Notes on the lubricant used").
Solvents and lubricants can cause skin irritations.
Avoid direct skin contact.
Solvents and lubricants can pollute soil and water.
Use and dispose of cleaning solvents and lubricants properly.
