Assembly
LK
+
/LPK
+
/LPBK
+
en-10
2022-D026817
Revision: 04
5
Assembly
z
Be informed of the general safety instructions before beginning work. (see Chapter 2.7
"General safety instructions").
5.1
Preparations
The differences in the assembly sequence of LK
+
/LPK
+
and LPBK
+
are listed in the table "Tbl-5".
L
If you have any questions, please contact our Customer Service department.
z
Clean/De-grease the following components with a clean and lint-free cloth and grease-
dissolving, non-aggressive detergent:
- All fitting surfaces to neighboring components
- Centering
- The motor shaft
- The inside diameter of the clamping hub
- The bushing inside and out
z
Check the fitting surfaces additionally for damage and impurities.
LK
+
/LPK
+
LPBK
+
—
1
5.2 "Mounting the
gearhead to a
machine (only
LPBK
+
)"
1
5.3 "Mounting the
motor onto the
gearhead"
2
5.3 "Mounting the
motor onto the
gearhead"
2
5.4 "Mounted
components on the
gear output side"
3
5.4 "Mounted
components on the
gear output side"
3
5.5 "Mounting the
gearhead to a
machine (only LK
+
/
LPK
+
)"
—
Tbl-5: Assembly sequence
Pressurized air can damage the gearhead seals.
z
Do not use pressurized air to clean the gearhead.
