TK
+
ATEX
Disassembly
Revision: 05
2022-D034859
en-25
8
Disassembly
If you need to remove the gearbox for maintenance or replacement, complete the steps in this
chapter.
Read the general safety instructions before beginning to work (see Chapter 2.5 "General
safety instructions").
Secure the higher-level machine against restarting and unintentional movements during
assembly and maintenance work (e.g. uncontrolled lowering of lifting axes).
8.1
Removing the components of the output side
The output side has different shapes depending on the product type:
- Smooth shaft
- Shaft with shaft key
- Splined shaft (DIN 5480)
- Blind hollow shaft / hollow shaft / hollow shaft interface / flange hollow shaft
- Flange
- With mounted output pinion
For details on how to remove the components of
slip-on shaft / hollow shaft / hollow shaft
interface
, refer to the instructions in Chapter 8.1.1 "Removing the shrink disc".
There are customer-specific designs for all other types of outputs. The removal of these outputs
cannot be described here.
8.1.1 Removing the shrink disc
Unscrew the screws in the flange to remove the components
of the
flange / flanged hollow shaft
.
Loosen the clamping screws [P
2
] one after another in multiple
circular passes.
If the outer ring does not detach itself from the inner ring,
remove a few of the clamping screws and screw into the
adjacent extraction threads.
Remove the gearbox from its position with care, so as to
safeguard the gearbox and adjacent parts against damage.
P
2
