15
Fitting - installing:
Ensure that there is a distance of 50 mm between the hob and the wall or sides.
The hobs are classified as “Y” class for heat protection. Ideally the hob should be installed
with plenty of space on either side. There may be a wall at the rear and tall units or a wall
at one side.
On the other side, however, no unit or divider must stand higher than
the hob.
The piece of furniture or the support in which the hob is to be fitted, as well as the edges of
furniture, the laminate coatings and the glue used to fix them, must be able to resist
temperatures of up to 100 °C.
The mural rods of edge must be heat-resisting.
Not to install the hob to the top of a not ventilated oven or a dishwasher.
To guarantee under the bottom of the hob casing
a space of 20 mm
to ensure a good air
circulation of the electronic device.
If a drawer is placed under the work, avoid to put into this drawer flammable objects
(for example: sprays) or not heat-resistant objects.
Materials which are often used to make worktops expand on contact with water. To protect
the cut out edge, apply a coat of varnish or special sealant. Particular care must be given
to applying the adhesive joint supplied with the hob to prevent any leakage into the
supporting furniture. This gasket guaranties a correct seal when used in conjunction with
smooth work top surfaces.
The safety gap between the hob and the cooker hood placed above must respect the
indications of the hood manufacturer. In case of absence of instructions respect a distance
minimum of 760 mm.
The connection cord should be subjected, after building, with no mechanical constraint,
such for example of the fact of the drawer.
Cut size
Glass size
Cut size of flush mouting
Type
Width
Depth
Width
Depth
Thickness
Width
Depth Thickness Radius
WIP60SQ
560
490
590
520
4
596
526
4
8
WIF60SQ
560
490
590
520
4
WIP70SQ
670
490
700
520
4
706
526
4
8
WIF70SQ
670
490
700
520
4
WIP78SQ
750
490
780
520
4
786
526
4
8
WIF78SQ
750
490
780
520
4
WIP90SQ
810
490
880
520
4
886
526
4
8
WIF90SQ
810
490
880
520
4
WIP100SQ
986
380
1000
400
4
1006
406
4
8
WIF100SQ
986
380
1000
400
4