Witt CM2083DA, Руководство пользователя

Страница: 3 / 8

WHEN USING IT FOR THE FIRST TIME
In order to get the optimal taste, it is recommended to use the coffee machine with clean
water 2-3 times before brewing your first pot of coffee. Turn off the device when the
water has run through and let the device cool down for five minutes. Then repeat the
procedure with fresh water.
BREWING COFFEE
• Fill the water tank with water. Ensure that the water level is not below the
minimum or “MAX” markers. Only use fresh, cold water. The number of cups
that will be brewed can be seen on the water tank.
• Insert a new size 1x4 coffee filter and add the desired amount of coffee to
the filter.
•
Turn on the device. Wait until the coffee has finished brewing and there is
no more water left in the filter basket.
• For large cups: Use 5-6g of ground coffee per cup.
DO YOU WANT TO BREW MORE COFFEE RIGHT AWAY?
If you have brewed a single cup of coffee and want to make more right away, then turn
off the coffee machine and let it cool down for at least five minutes. After that, you can
refill the water tank.
HOW TO OPERATE
ON/OFF
P – PROG. (programme)
H – HOUR (hours)
M – MIN (minutes)
CLEANING AND MAINTENANCE
• Always remove the plug from the socket before cleaning the device.
•
Never lower the device into water or other kinds of fluid.
• Always use a moist rag to clean the device.
•
The carafe and filter basket can be washed in hot soapy water.
DESCALING
• Descale your coffee machine on a regular basis.
•
Operate the device as described above, but now fill the water tank with
regular vinegar and do not put coffee in the filter basket.
•
After the descaling process is completed, run clean water through the
device a few times in order to remove any residual vinegar or chalk.
1. Primary functions
(1) Delayed start (0
~
24 hours) and immediate heating up.
A delayed start requires that you set the time and set up the Delayed start.
Once the timer hits the specified time, the device will begin heating up and
then shut down automatically after 40 minutes. For an immediate heating
up, press the On/Off button - then the device will either begin heating up or
it will turn off.
(2) Auto shutdown: once the device has been turned on for more than 40
minutes without being operated, it will automatically turn off.
OPERATING PANEL
(1) On/Off ( ): When the device is attached to a power source, the screen will
blink and display 0000. If you press the On/Off button, the advice will go into
standby mode and the screen will stop blinking (0000 will still be displayed).
The operating panel’s other buttons can only be used once the device is in
standby mode. When you press the On/Off button again, the device will start
heating up and the icon will be displayed.
3 4