Witschi Watch Expert, Руководство по эксплуатации

Страница: 66 / 77

9 Performing firmware update
9.1 Registering Watch Expert
Registering the Watch Expert
To access Witschi Service and the most up-to-date
firmware release, register your Watch Expert at the
following address:
http://www.witschi.com “Support” “Create account”
After successful registration, the most up-to-date
firmware can be accessed under “Firmware”
“Product overview”.
9.2 Updating firmware
The pilot microphone is connected to the Watch Expert.
1. The file “Update_WE4.zip” is downloaded from the Witschi
Support page onto an empty USB stick.
2. Unpack “Update_WE4.zip”.
3. Run the file “Update_xxx.exe”.
ð
The files and directories are created on the USB stick.
4. Switch off the Watch Expert.
5. Insert the USB stick into the USB port on the reverse side of
the Watch Expert.
6. Switch on the Watch Expert.
ð
The boot-up is started. Once the boot-up is complete, the
“Update Window” appears
7. To start the update, press the “Update” button. The process
lasts approx. 3 minutes.
NOTICE!
Potential damage and loss of data!
Switching off or disconnecting the power
supply can cause irreparable damage to the
Watch Expert or result in loss of data.
– Never switch off the Watch Expert during
an update.
– Never remove the Watch Expert from the
power supply during an update.
ð
The update is started.
Performing firmware update
Updating firmware
27.02.2018 Precision measuring device Watch ... 66