WiTi Anti Theft, Руководство по эксплуатации и установке

Страница: 4 / 4

Anti Theft Installation
The unit
must be installed vertically
with
the wiring harness protruding from the bottom
of the unit. WiTi uses gravity to initialise the
anti-theft system and if not installed vertically
functionality could be compromised.
WiTi Anti Theft can be installed in any area
that makes practical sense, typically next to
or near the battery in the caravan or trailer.
WiTi can be secured to any flat surface using
strong double sided tape.
The horn must be installed at least 1 metre
away from the Trailer Unit and on a different
mounting surface to prevent interference.
The caravan or trailer battery must be
connected to an acceptable charging circuit -
either solar panels, anderson plug or DCDC
charger.
INSTALLATION INSTRUCTIONS
Wiring Instructions
The Anti Theft system is supplied with two
connectors, an 8 pin unit for the lights, brakes
and horn circuits and a 2 pin connector for
power. Install the wiring on the corresponding
plugs supplied before connecting to the Trailer
Unit.
Connect one of the terminals on the horn
to the green and white wire and the other
terminal to an earthing point.
Note: If a break away option is installed there
will be two additional blue wires on a separate
2 pin connector. These must be connected to
the break away switch on the caravan.
Wire
Colour
Function
Yellow
Left Indicator
Green
Right Indicator
Red Brake Light
Brown
Driving Lights
Black
Reverse Lights
Blue
Electric Brake Output
White
Earth Return
Green / White
Alarm output. Connect to
the horn. The horn can be
earthed to the chassis or any
earth point. It is not polarity
sensitive.
Wire
Colour
Function
Red 12V+
Connect to the positive termi -
nal of the battery.
Black NEG
Connect to negative terminal
of the battery.
Wire Colour Function
Blue X 2 Break away Switch