Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in-
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety instructions
Please make sure to carefully read the information and safety instructions found within this instruction
manual and to adhere to them in order to ensure an ideal mode of operation while at the same time
minimising the risk of accidents. The instructions found in this manual thereby do not replace rules and
regulations applying at your workplace and instead complement them. Keep this manual and make
sure it is in reach when working with this product.
General safety
•
Only qualified technical personnel may perform repair and in-depth maintenance work on this
device and its electric components.
•
Make sure the device has been properly turned off and disconnected from its power supply
before cleaning it or performing any repairs and maintenance.
•
The device must always be disconnected from its power supply when it is not in use and
ensure that it is safely stored in a place unavailable to children.
•
Always be vigilant when operating this device and do not operate it while being tired or under
the influence of drugs, alcohol or medication.
•
Never use the device without its chassis being in place.
•
Ensure to keep your workplace clean, organised and well-lit. Dark and cluttered workplaces
drastically increase the risk of accidents.
•
Never use this device in environments containing flammable or explosive substances, liquids
or gases as these might be ignited.
•
Do not expose the device to rain, any other sources of water or environments with a high level
of humidity.
•
It is advised to place the device on even surfaces, but it can safely be placed on surfaces with
an inclination of up to 15°. Please be aware that the device requires a secure stand and that
its wheels need to be blocked in order to prevent the device from moving, if not used on even
surfaces.
•
Do not use the device if the power chord is damaged or shows signs of wear, and never try to
repair a damaged power chord. Instead have it replaced by qualified technical personnel.
•
This device must not be used by children or individuals with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge. Children playing in the vicinity of the
device should be supervised at all times in order to ensure that they do not play with it.
•
Do not use this device for thawing pipes.
•
Do not use rusty wires as its rough surface might damage the device.
•
The device must not be used, if parts or components show signs of damage or wear. Replace
the worn or damaged parts before operating the device again.
•
In addition to the information given in this instruction manual, always regard the local rules and
regulations concerning security and accident prevention.
Fire safety
•
Ensure to remove all flammable and explosive materials from the working area as well as its
close vicinity in before operating this device.
•
Do not weld fuel tanks or similar containers for explosive or flammable substances, if these
have not been cleaned duly and it cannot be guaranteed that they are free from remnants
such as residual gases. Fuel tanks should be thoroughly cleaned with a steam cleaner before
any kind of welding work can be performed on them.
© by WilTec Wildanger Technik GmbH
Item 62549
Page 3
http://www.WilTec.de
http://www.aoyue.eu
01 2021-1
