www.witeg.de
witeg Labortechnik GmbH, WiseTherm
®
HP-A Hotplate
10
2.2 Instructions
For a safety and faultless using of the device it is indispensable that you read the following
instructions purposely and follow them by the use.
Connect the device only to the suitable power supply.
Use the device only in electric circuits with ground fault circuit interrupter.
Check the power supply cord before you stick it into the electrical outlet.
Do not use power bars to extend the power supply cord.
Only use extension cables with sufficient cable cross section.
Do not touch the device with wet hands during the usage because this might cause an
electrical shock.
If unexpected sound, smell or smog is generated by the device, pull out the main plug and
contact the manufacturer or your supplier immediately.
Disconnect the power supply plug before cleaning or maintenance.
If you use radiation or contaminated samples the responsibility is only up to you.
The hotplate could be scorching during and after the usage.
Do not put heat-sensitive items at the hot plate.
Warn all attendees if you leave the device unattended.
Only use adequate sized vessels and avoid an overboil of the liquids.
Do not clean the scorching ceramic suited hotplate.
Reparations and amendments should only made by
witeg
authorized people.
Contraventions exclude the warranty.
