witbox bq, Быстрый старт

Страница: 27 / 33

27
ENGLISH
TROUBLESHOOTING
FAQs
I can’t load the filament into the extruder
Trim the end of the filament again. Throw away any damaged, bent or excessively
curved sections. Make sure there is no filament residue in the guide tube.
The LCD screen is showing strange letters/symbols. What should I do?
Remove the SD card from the printer and then put it back in again. If the problem
persists, switch the device off and then switch it on again.
I can’t remove the completed objects after printing
This is because the extruder is positioned too close to the print base, meaning
the first layer of plastic has adhered too firmly to it.
To remove the object, immerse the print base in hot water. If you still can’t
remove the object, carefully use a spatula or similar utensil to loosen it at the
edges.
After you have removed the object you need to level the print base in order to
create more space between the base and the extruder.
Objects won’t adhere to the print base
This is because the extruder is positioned too far away from the print base or
the print base has become dirty (fingerprints, etc.). Level the base in order to
reduce the distance between the base and the extruder.