WiT WT901BLECL, Руководство пользователя

Страница: 6 / 30

WT901BLECL BLE5.0 | manual v0707 | http://wiki.wit-motion.com/english
- 6 -
1.1 Warning Statement

Putting more than 5 Volt across the sensor wiring of
the main power supply can lead to permanent damage
to the sensor.

VCC cannot connect with GND directly, otherwise it
will lead to the burning of the circuit board.

For proper instrument grounding: use WITMOTION
with its original factory-made cable or accessories.

Do not access the I2C interface.

Do not change the baud rate because WitMotion
Bluetooth sensor’s baud rate is fixed.

For secondary developing project or integration:
use WITMOTION with its compiled sample code.
1.2 LED Status
LED Status Remark
Red Keeping on Charging (powered by a universal
Micro-USB data cable)
Blue
Flash once and then
disappear
Standby
Flashing Pairing succeeds