WisyCom MSR916, Руководство пользователя, Страница: 6 / 12

5
Troubleshooting
No audio output Check AF ON indicator : if it is OFF, verify T.SQL and SQUELCH
setting according the following table
SQUELCH setting T.SQL setting AF ON

audio
output enabled
RF level<SQUELCH T.SQL = OFF or ON off
RF level>SQUELCH
T.SQL = OFF on
T.SQL = ON &
P.TONE is OFF off
T.SQL = ON &
P.TONE is ON on
Check RF level bar : if they shows no level or low level, try to
decrease the squelch level
If T.SQL is set to ON but the P.TONE indicator is OFF

check on the transmitter’s configuration if the Wisycom pilot
sub-carries is enabled

change T.SQL to OFF
no levels on battery bar

check on the transmitter’s configuration if the Wisycom pilot
sub-carries is enabled to send battery data
Distortion or unwanted
noise bursts Remove nearby sources of RF interference (CD players,
computers, digital effects, in-ear monitor system, etc.)
Change receiver and transmitter to a different frequency
Reduce transmitter gain
Replace transmitter batteries