RS 005 Instruction
2
4
A
H
1
3
76
100
Note:
1. Do check the position chosen does not prevent the awning from closing and no harm to RS005 motion sensor.
1
）
Fix with double-sided adhesive
Note:
Other adhesive rather than supplied together with the motion sensor is forbidden.
Choose a flat surface on the load bar which is suitable for gluing. Ensure that this position dose not prevent the awning
from closing and does not damage the motion sensor. Clean this position with a cloth. Paste one side of adhesive
on the bottom cover. Fix the bottom cover onto the chosen position as the arrow shows.
2
）
Fix with clips and screws
Fix the supplied clips and screws onto the bottom cover.
Note: If the awning load bar has no groove, please refer to the following Screw Installation. Slide the bottom cover into
the groove and fix it at a suitable position as the arrow on the bottom cover shows. Check this
position which dose not prevent the awning from closing and dose not damage the motion sensor.
3
Fix with screws
（
use
4
-
mm
diameter
screws
）
Choose a suitable position for the bottom cover. Check this position
dose not prevent the awning from closing
and dose not damage the motion sensor.
Drill two holes in the load bar to match the holes in the bottom cover and to suit the supplied 4mm diameter screws.
(see the detailed dimension in 3 )
Keep the arrow engraved into the bottom cover Upwards.
Fix the bottom cover on the bar with the supplied screws.
）
which
UP
U
P
2. We advise you install the sensor in the backside or downside of the load bar to prevent rainfall. (The sensor is
water proof but it is better to protect it).
3.We advise you to install the sensor near the end part of the load bar to increase its sensitivity.
Power: two AAA batteries
Protection Index: IP55
Temperature: -20
℃
to +60
℃
Working Current:
≤
8mA
Codes: Rolling Codes
Frequency: 433.92MHz
E.Indicator light
D.Learning button
Upper cover
A.
B.AAA Alkaline Batteries
C.Front/Back or Underside installation switch
F.Potentiometer
G.Inner cover
H.Bottom cover
Technical Data
Products Details
Dimension
Installation
Instruction
RS 005
01
B
C
D
E
G
F
in
11
.
03
.
03
.
SMS
-
RS005YT-02-V2
30.8
132
38
