- 5 -
1.9
To avoid dangerous unplanned acceleration, always make sure that the
electrical system is turned off .For your safety, please turn off the power key on
the battery when stopped or walking the bike
1.10
Remember to validate your warranty by visiting
www.wisperbikes.com/mywarranty
and filling in your details.
2 Before each use
It is important you perform a quick check of your bike every time you use it, checks
should include the following, if you find any damage or problems do not use the bike
until the problem has been solved or you have had the faulty item checked by a bike
mechanic or your retailer.
2.1
Check tyres for any visible damage
2.2
Check tyre pressures
2.3
Check for any lose nuts bolts or fixings
2.4
Check brake functions
2.5
Check electronic functions
2.6
Check reflectors are in place and lights are working
2.7
Check your battery for any visible signs of damage
3 Battery care
3.1
Before you use the battery for the first time it is best to give it a full deep charge
for 12 hours. To fully condition your new battery give it complete deep charge,
discharge cycles for the first three charges. This is achieved by charging your
battery for 12 hours and then using the bike until the battery is completely
drained. After this “conditioning” process you can then charge and discharge
the battery as and when you require for long or short periods.
3.2
If you are going to leave your battery uncharged for more than eight weeks it is
best left half charged. You should then re charge it every four weeks for two
hours to keep it in top condition.
3.3
Before setting off on any journey it is always better to have a fully charged
battery
3.4
Always remember that you use up to three times more power when setting off
under the twist throttle. To preserve the life of each charge always set off using
pedal assist
3.5
Do not expose the bicycle or battery pack to fire, heat sources, acid or alkaline
substances