Wisper 905se City Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 18

Wisper 905se City Скачать руководство пользователя страница 13

- 13 -

15 Stem handle bar clamp

15.1

Your bike has been fitted with a quick release handlebar clamp that allows you
to change the position of the bars quickly and easily to find the most
comfortable riding position.

15.2

The stem and handle bars need to be fitted before you use the bike.

15.3

To fit, insert the stem into the front tube at least to the position of the
“Minimum insertion” mark.

15.4

Tighten the quill bolt and fix stem.

14.5

Push in the direction of the arrow slide cap 1 and lift lever 2.

15.6

Adjust stem to preferred angle and lightly tighten BOLT 1 then turn BOLT 2
to suitable position so that the slide cap 1 will fit when locked, then press down
lever 2 to lock the handle bars in position.

15.7

Test the bars to make certain they are tight and do not rotate. If they are not
tight enough, lift lever 2, adjust BOLT 2 again then press down lever 2. Repeat
until the handle bars are tight and safe.

IMPORTANT when fitting always lock Bolt 1 first so the body and first cap touch then
lock Bolt 2.

15.8

When adjusting stem angle, it is not necessary to adjust bolts.

16 The front connection box

16.1

The front connection box allows for the easy removal for repair
or replacement of any of the electronic components on the
handle bars.

«
...
11
12
13
14
15
...
»

Содержание 905se City



















Отзывы:

Нет отзывов